How to pair a smart dimmer

To pair a smart in-wall dimmer, follow these steps:

1. Go to the Devices page in the app by tapping on the lamp icon at the bottom of the screen.
2. Tap on the + in the upper right corner.
3. Tap on Add a device.
4. Tap on Thermostat, in-wall switch, etc.
5. Tap on I don’t have a Data Matrix code.
6. Tap on Continue – This action will put the hub in pairing mode. The indicator light on the hub will blink blue.
7. Put the dimmer to the OFF position.
8. Rapidly press the top of the dimmer button 10 times. The indicator light at the bottom of the dimmer will blink blue three times. The smart dimmer will be paired with the hub when the indicator light stops blinking.
9. In the app, tap on Close when you see The device(s) have been added! The Devices page will be displayed again.
10. Wait about 60 seconds, until the smart dimmer’s tile appears or is reactivated in the app.
11. Switch the dimmer on from the app.
12. Pairing is complete. If no other devices need to be paired, press the button on the hub to exit pairing mode.